Joenit

Expected: mid-November 2026

Your first real turntable.

Out of the box, plug in, record on. That is all it takes.

ready to play in a minute

€ 349recommended retail price, VAT included

Find a dealer

Reserve one with your dealer – the first delivery is expected in mid-November.

The Rega Replay in matt black, three-quarter view from above, a pink record on the platter and the RB110 tonearm on its rest.

Three steps

That simple.

The Rega Replay without its platter: the matt black plinth with its three feet, the sub-platter and the RB110 tonearm.
1

Out of the box

Push the counterweight onto the arm, as far as it goes. There is nothing else to adjust.

The Rega Replay in matt black from the front, a marbled blue record on the platter, RB110 tonearm with the Carbon cartridge.
2

Plug in

Arm lead into an amplifier with a phono input, or into a separate phono stage. Adapter into the wall socket.

The Rega Replay in matt black seen from directly above, a green record on the platter and the RB110 tonearm resting beside it.
3

Record on

Stylus guard off, switch on, lower the arm. Listen.

What's inside

Small, and still a real Rega.

Close-up of the RB110 tonearm on the Rega Replay: the bearing housing, arm lift and counterweight in matt black.

RB110 arm

Built by hand, on ultra-low-friction bearings. The bias is set at the factory.

Close-up of the Rega Replay playing: the Rega Carbon cartridge on the RB110 tonearm, tracking a spinning record.

Carbon cartridge

Fitted and aligned at the factory. When the stylus wears, you replace just the stylus.

The Rega Replay in matt black at home on a stone surface, a turquoise record on the platter, leaf shadows on the wall behind.

23 mm platter

Phenolic resin, with enough mass to work as a flywheel. That keeps the speed steady.

The Rega Replay in matt black, three-quarter view, clear dust cover closed over the white platter mat and the RB110 tonearm.

Dust cover

Made to measure and removable. Keeps the dust off arm and record when it is not playing.

  • Handmade in the UK
  • Lifetime warranty
  • 33⅓ and 45 rpm

The story

The Replay

The Replay is the way into Rega's range: it sits below the Planar 1, for the listener who wants a real turntable straight out of the box. Rega spent three years refining it, and it is built by hand in the UK. The RB110 arm has its bias fixed at the factory and carries an aligned Carbon cartridge, so the first record is playing within a minute. Under that simplicity sits real engineering: a low-noise 24V motor, a brass bearing housing, a 23 mm phenolic platter and a skeletal plinth with a black MDF core. There is no phono stage inside; the amplifier or a separate phono stage provides it.

Detail of the Rega Replay badge: the black centre disc with the Rega and Replay logos, set in clear acrylic over a white mat.

In short

TonearmRB110, hand assembled, 111 g counterweight
CartridgeCarbon (moving magnet), factory fitted
Motor24 V synchronous motor, low noise
PlatterPhenolic resin, 23 mm, flywheel effect
Dimensions415 x 115 x 320 mm (W x H x D, lid closed)
Weight2.2 kg
FinishMatt black
Find a dealer